Wolf IF15/S Use & Care Manual page 9

Fryer Module Operation
Fryer Module Operation
SETTING CONTROLS
The control panel of your fryer module is illuminated and
features touch controls with graduated control lighting and
temperature display. Refer to the illustrations below.
To activate the fryer module, first touch the OFF ON touch
pad on the control panel. The power bar indicator will
begin to blink and show a half-power status. To complete
the activation, touch one of the following symbols or touch
pads while the power bar indicator is still blinking:
+
• Touch the symbol to set the temperature to 350°F
(175°C) and complete the activation.
–
• Touch the symbol to set the temperature to 350°F
(175°C) and complete the activation.
• Touch HIGH to set the temperature to 400°F (205°C)
and complete the activation.
• Touch LOW to set the temperature to 190°F (90°C) and
complete the activation.
+
AND
TOUCH PADS
LOW OFF ON HIGH
Touch control panel.
–
TEMPERATURE
DISPLAY
Temperature readout display.
To change the power level setting once the unit is
activated and the power bar indicator remains steadily lit:
+
• Touch the symbol to increase the temperature
set point.
–
• Touch the symbol to decrease the temperature
set point.
• Touch HIGH to increase the temperature set point to
400°F (205°C).
• Touch LOW to decrease the temperature set point to
190°F (90°C).
• Touch OFF ON to turn the module off.
9
wolfappliance.com