Battery Service; Battery Charging - Simplicity Cobalt 2690479 Operator's Manual

Troubleshooting, Adjustment & Service

BATTERY CHARGING

A dead battery or one too weak to start the engine
may be the result of a defect in the charging system
or other electrical component. If there is any doubt
about the cause of the problem, see your dealer. If
you need to replace the battery, follow the steps
under Cleaning the Battery & Cables in the Regular
maintenance Section.
To charge the battery, follow the instructions provided
by the battery charger manufacturer as well as all
warnings included in the safety rules section of this
book. Charge the battery until fully charged (until the
specific gravity of the electrolyte is 1.250 or higher
and the electrolyte temperature is at least 60° F). Do
not charge at rate higher than 10 amps.
42
www.simplicitymfg.com