Table of Contents
Advertisement
Troubleshooting
The Adapter does not perform or connection is unstable
when computer has a second built-in wireless network
card (such as a mini PCI or Intel
This condition occurs if your computer has a built-in wireless
card while your Belkin N Wireless USB Adapter is also active.
This happens because Windows must now handle two active
wireless connections.
You must disable the built-in wireless card from your computer
under "Network Adapters" in the Device Manager.
The Adapter does not perform or connection is slow
when computer has a built-in wired Ethernet card.
This condition occurs if your computer has an active Ethernet
card while your Adapter is also active. This happens because
Windows must now handle two active network connections.
You must disable the Ethernet card from your computer under
"Network Adapters" in the Device Manager.
What's the difference between 802.11g and
draft 802.11n?
Currently there are three commonly used wireless networking
standards, which transmit data at very different maximum
speeds. Each is based on the designation for certifying network
standards. The most common wireless networking standard,
802.11g, can transmit information up to 54Mbps; 802.11a also
supports up to 54Mbps, but in the 5GHz frequency; and 802.11n
draft specification can connect at up to 300Mbps. See the chart
on the next page for more detailed information.
Centrino
).
®
™
39
39
1
2
3
4
5
6
Advertisement
Table of Contents
