Helpers Handle - Stihl 090 Instruction Manual / Owners Manual

Helpers Handle
Knocking out blanking plug
,--------~~~-~
For safety reasons and
to
Improve cutting accuracy
~
is
. . advisable to use the helpers handle (1109 660 2500)
n
your
saw is equipped
with
a 105 em (42 In) or longer cutting
attachment.
With
the handle fitted a second man can safely
assist the saw operator in handling the saw.
When the helpers handle Is being used the non-cutting
side of the saw chain must always
be
covered by a guard
rail which matches the
bar
length.
To assemblethe helpers handle, first knockoutthe blanking
plug (3) In the slot (1) at the
bar
nose (2). Then tum the
clamp nut (5) (star knob) counterclockwise
to
rotate
the
head of
the clamp bott (4) so
that it fits
through
the
slot (1)
in the bar. The head of the clamp bon (4) is turned through
90" when the clamp nut (5) (star knob) Is
tightened and
thus secures the helpers handle (6) against the guide
bar (2).
To attach the guard rail (7), first ffl the mountfng
hardware
to
the CI8J1kcase and the helpers handle
and
then place the
guard rail
In
posiIJon .
Top: TIghtening the clamp nut
Center: Mounting hardware fitted on bumper spike
Bottom: Guard rail in posttion
_ _ _ 6
'-'-_ _ _ _ 1
23