/
Settings
Calibrate the Soundbar with Automatic
MultiBeam™ Calibration (AMC)
Automatic MultiBeam Calibration (AMC) will optimize the
soundbar sound settings for a better surround sound
experience.
1) Press and hold the CALIBRATION
• The calibration sequence will begin with a countdown.
2) The total calibration will last less than 60 seconds.
• "DONE" will be displayed once successfully calibrated,
while "FAIL" will be displayed if the calibration fails.
NOTES:
•
Remove any interference from both sides of the soundbar so the
side-firing speakers can operate correctly and reflect sound in
your room.
•
Any ambient noise or sounds may disrupt the calibration sequence.
Step out of the way and remain silent during the calibration.
•
Calibrate the audio each time you moxve the soundbar to a
different location.
•
Calibration settings can be deleted by system reset: press and
hold the
and
>3 s
buttons on the soundbar.
button for 3 seconds.
32