Reset The Mobile Hotspot; Reset The Mobile Hotspot From The Mobile Hotspot; Reset The Mobile Hotspot From The Mobile Hotspot Web Page - NETGEAR AirCard 797 User Manual

Table 2. Connection alerts (Continued)
268 PDP Duplicate
269 UE RAT Change

Reset the Mobile Hotspot

You can reset the mobile hotspot to the factory settings. This is useful if you forgot your
attadmin login password for the mobile hotspot web page.
If you reset the mobile hotspot, all of your customizations are lost. If you want to keep
them, save them before doing the reset and restore them afterward. See Back Up and
Restore Mobile Hotspot Settings on page 56.
Note: When you reset the mobile hotspot, any currently connected devices lose access
and must be reconnected after the mobile hotspot restarts.

Reset the Mobile Hotspot From the Mobile Hotspot

Start with the mobile hotspot turned on.
To reset the mobile hotspot directly from the mobile hotspot:
1. Press and hold the power button for at least 15 seconds.
The mobile hotspot enters factory reset mode and first displays the message,
"Shutting down," followed by the message "Continue holding Power button to reset
all settings to factory default," and then "Resetting Device. Please do not power off."
Note: If you release the power button too soon, the mobile hotspot turns off instead
of resetting.
Reset the Mobile Hotspot From the Mobile Hotspot Web
Page
To reset the mobile hotspot to its factory settings:
1. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a
web browser.
2. Enter http://attwifmanager/.
The mobile hotspot web page displays.
Troubleshooting
AirCard 797 Mobile Hotspot
82 User Manual