Attaching A Camera Adaptor - Sony BVP-550 Operation Manual

6
Securely tighten the two screws supplied with the
VTR.
3-3-2 Attaching a Camera
Adaptor
When the CA-550/550P Camera Adaptor is attached to
the video camera, you can connect a VTR, a camera
control unit, or an AC adaptor to the camera adaptor.

Attaching a Camera Adaptor

1
Attach the CA-550/550P Camera Adaptor to the
video camera.
Hook the upper part of the CA mount then push the
lower part securely. Then make sure the video
camera adaptor is completely attached to the video
camera.
2
Tighten the screws.
Removing a Camera Adaptor
Completely loosen the CA screw on the video camera
until it idles and then remove the camera adaptor while
pushing the CA screw.
Securely tighten the CA screw supplied with the
camera.
Tighten the CA screw.
Loosen the CA screw on
the video camera until it
idles and then remove the
camera adaptor while
pushing the CA screw.
Chapter 3 Setting Up the Video Camera
Letter Ver.3.0
3-5
3-810-005-11(1)