Accepting Calls; Conversation With Three Participants - Gigaset N870 IP PRO Installation, Configuration And Operation

Accepting calls

Incoming calls for the connection assigned to your handset are signalled.
¤
Press the Talk key
Switch off ringtone:
Reject a call:
Information about the caller
The caller's phone number is displayed, if provided. If the caller's number is saved in the direc-
tory, the name is displayed.
Using a PBX call manager
In case a PBX call manager is used it is possible to define that incoming calls are accepted directly
via headset or handsfree. This has to be configured for the handset via web configurator in the
Call manager section (
Group pickup
You can also accept incoming calls for the group.
Group pickup must be activated and the call number or SIP URI of the group must be entered.
This has to be configured for the handset via web configurator in the Group pick-up
¢
section( page 63)
Accepting/rejecting call waiting
A call waiting tone indicates a call during an external call. The number or the name of the caller
is displayed if the phone number is transferred.
•
Reject a call: Options
•
Accept a call: Accept
•
End the call, resume the on-hold call:

Conversation with three participants

Consultation calls
Make another external call during an external call. The first call is placed on hold.
¤
Ext. Call . . . use
placed on hold and the second participant is called
If the second participant does not answer:
Ending a consultation call
¤
Options End active call
or
¤
Press the End call key
Using a handset connected to an N870 IP PRO base
to accept the call.
¤
Silence . . . the call can be accepted for as long as it is shown on the
display
¤
Press the End call key
¢
page 63).
Reject waiting call
. . . speak to the new caller. The previous call is placed on hold.
to enter the number of the second participant . . . the active call is
OK . . . the connection to the first caller is reactivated
. . . a recall to the first participant is initiated
OK
Press the End call key
End
.
99