Configuration Of The Dsp; Connecting The Remote Output - HELIX DSP PRO MK2 Manual

Installation
by the jumper for adjusting the input sensitivity
of the highlevel inputs (see marking in the fol-
lowing picture).
On: Activation via highlevel speaker input is
enabled (ex works).
Off: Activation via highlevel speaker input is
disabled.
22
The general DSP settings should be con-
ducted with the DSP PC-Tool software be-
time.
Ignoring this advice may result in damaging the
mation about connecting the DSP PRO MK2 to
a computer can be found on page 24.

9. Connecting the remote output

This output (Remote out) is used to supply re-
use this remote output signal to turn on the am-
-