Tf-Disk Patch Messages - IBM Series/1 User Manual

TF-DISK PATCH MESSAGES
TFIOOE
TF101E
TFI02E
TFI04E
TFI05E
TFI06E
Message and Explanation System Action
INV ALID DISPLACEMENT - NON-DECIMAL DIGIT
The byte displacement into the
sector is not a decimal digit.
The byte displacement is the 3rd
parm used to describe the patch
location in response to PATCH
AREA=ddd,ccchss,bbb,nnn. The
byte displacement (bbb) must be
3 decimal digits.
Reprompts.
INV ALID DISPLACEMENT - 3 DIGITS REQUIRED
The byte displacement into the
sector is not 3 decimal
digits. The byte displacement
is the 3rd parm used to describe
the patch location in response
to PATCH AREA=ddd,ccchss,bbb,nnn.
The byte displacement (bbb) must be
3 decimal digits.
Reprompts.
INCORRECT NUMBER OF PARAMETERS - 4 REQUIRED
The expected number of parameters
was not received. The response to
the prompt message PATCH AREA= must
be of the form ddd,ccchss,bbb,nnn.
INV ALID BYTE COUNT - NON-DECIMAL DIGIT
Reprompts.
The number of bytes to display Reprompts.
for verification is not a decimal
digit. The byte verification count
(nnn) must be 3 decimal digits.
INV ALID BYTE COUNT - 3 DIGITS REQUIRED
The number of bytes to display for
verification is not 3 decimal
digits. The byte verification
count (nnn) must be 3 decimal digits
greater than 0 but less than 257.
PATCH EXCEEDS SECTOR BOUNDARY
When either the number of bytes
to display for verification or
the actual patch data is added to
the byte displacement, the result
is greater than 256. The data would
be beyond the extent in bytes of
the sector within which the
patch should be applied.
Reprompts.
Reprompts.
M-26 GC34-0070
Your Action
Reenter the patch data with the
correct byte displacement.
Reenter the patch data with the
correct byte displacement.
Reenter the patch data with the
correct number of parameters.
Reenter the patch data with the byte
verification count in decimal.
Reenter the patch data with 3
decimal digits.
Reenter the patch data with the
corrections.
(