Status Leds - 3Com LANplex 6000 Installation Manual

Status LEDs

Each TRSM contains two Module Status LEDs and eight Port Status LEDs.
Depending on the condition, each LED is either green or yellow. Table 1
describes these LEDs.
Table 1 FDDI/Ethernet Switching Module LEDs
LEDs
Module
Status
Port
Status
Name Color
Pwr/Unseat Green
Yellow
Err Yellow Indicates either that an error has
(Error)
Port Status Green
1 - 8
Yellow
Port Speed Green
1 - 8
Yellow
Yellow
Port Mode
1 - 2
Green
TRSM Components
Description
Indicates that the module is powered on
Indicates that the module is not fully
plugged into the backplane
occurred or that the module has failed a
diagnostic procedure
Indicates that the associated port is active
Indicates that an error condition has
occurred with the associated port or that
the port is disabled
Indicates that the port is running at
16Mbps
Indicates that the port is running at
4Mbps
Indicates that the ports are configured as
lobes and can accept an external station
connection
Indicates that a station is attached to the
lobe port
13