Before mounting the table, press the button on the top of the Adjustable Handle and pull
the Heel Holder pads apart.
Once on the table, pull the Adjustable Handle back until the Heel Holder pads are tightly
holding your ankles.
When dismounting the table, press the button to release and open the Heel Holder pads.
If the button does not release the Heel Holders, pull the Adjustable Handle towards you
to release some tension, and then press the release button.
WARNING: To avoid serious injury, your ankles must
be secured before inverting. Do not use the table if the
ankle lock system does not function properly.
TOUBLESHOOTING SECTION
QUICK RELEASE ANKLE LOCK
20
If the Adjustable Handle does not
release when the release button is
pushed down, please follow these
steps:
1. Pull the Adjustable Handle back to
release some tension.
2. Press down on the Release Button.
3. Move the Adjustable Handle
forward.