D-Link DPN-144DG User Manual page 58

Gpon ont dual band wireless ac1200 voip gateway with 1 gpon port, 4 10/100/1000base-t ports, 2 fxs ports, and 1 usb port
Hide thumbs Also See for DPN-144DG:
Table of Contents

Advertisement

DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
Parameter
Primary IPv6 DNS
server/Secondary IPv6
DNS server
Figure 42. The page for creating a new Static IPv6 connection. The Miscellaneous section.
Parameter
Firewall
RIP
Ping
Isolate connection
When all needed settings are configured, click the APPLY button.
Enter addresses of the primary and secondary IPv6 DNS servers in
the relevant fields.
Miscellaneous
If the switch is moved to the right, protection against external
connections for the LAN devices is enabled (for example, against
attempts to get information about the LAN devices or to hack a
device from the LAN). For security reasons, it is recommended not
to disable this function.
Move the switch to the right to allow using RIP for this connection.
If the switch is moved to the right, the gateway responds to ping
requests from the external network through this connection. For
security reasons, it is recommended to disable this function.
If the switch is moved to the right, the gateway uses an alternate
routing table for this connection. Enable this function only when
your ISP requires this.
Page 58 of 217
Configuring via Web-based Interface
Description
Description

Advertisement

Table of Contents
loading

Table of Contents