Table of Contents
Advertisement
DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
LED
WIFI 2.4GHz
WIFI 5GHz
WPS
USB
Internet
On the right side panel of the gateway there is a WPS button designed to set up a wireless
connection (the WPS function) and enable/disable the wireless network.
To use the WPS function: with the device turned on, push the button, hold it for 2 seconds, and
release. The WPS LED should start blinking.
To enable/disable the gateway's wireless network: with the device turned on, press the button, hold
for 10 seconds, and then release it. The WIFI 2.4GHz and WIFI 5GHz LEDs should turn off.
Mode
The gateway's WLAN of the relevant band is on.
Solid green
Data transfer through the Wi-Fi network of the relevant
Blinking green
band.
The gateway's WLAN of the relevant band is off.
No light
Attempting to add a wireless device via the WPS
Blinking green
function.
The WPS function is not in use.
No light
A USB device is connected to the gateway's USB port.
Solid green
No USB device.
No light
The connection is on.
Solid green
The connection is off.
No light
Page 14 of 217
Description
Overview
Advertisement
Table of Contents
