Troubleshooting For L3 Igmp Routing - ZyXEL Communications ES 3500 Series Troubleshooting Manual

10 Troubleshooting for L3 IGMP Routing

Flowchart:
Access the switch using Layer 3 IGMP Routing.
Is the switch the active querier?
By default, querier is enabled on the Zyxel switch using IGMP Routing. However, this
switch can disable its querier role if another switch in the network also has IGMP
routing enabled.
Enter CLI through console or TELNET to verify whether the switch is the active querier
or not.
www.zyxel.com
56/132