System Configuration - Dell Latitude 5424 Rugged Owner's Manual

Option
UEFI Boot Path Security
Date/Time

System configuration

Table 59. System Configuration
Option
Integrated NIC
Onboard Unmanaged NIC
Serial Port 1
Serial Port 2
SATA Operation
SMART Reporting
178 System setup
Description
Allows you to control whether the system prompts the user to enter
the Admin password when booting to a UEFI boot path.
Click one of the following options:
• Always, Except Internal HDD—Default
• Always
• Never
Allows you to set the date and time. The change to the system date
and time takes effect immediately.
Description
Allows you to configure the integrated network controller.
Click one of the following options:
• Disabled
• Enabled
• Enabled w/PXE—Default
Allows you to enable / disable onboard USB LAN controller.
Allows you to configure(disable and re-mapping) the serial port(s).
Click one of the following options:
• Disabled
• Com1—Default (Port is configured with 3F8h with IRQ 4
• Com3 (Port is configured with 3E8h with IRQ 4
NOTE: Serial Port 2 is available when the system has
Serial Port in the rear configurable I/O space.
Allows you to configure the operating mode of the integrated SATA
hard-drive controller.
Click one of the following options:
• Disabled
• AHCI
• RAID On—Default
NOTE: SATA is configured to support RAID
mode.
This field controls whether hard drive errors for integrated drives
are reported during system startup. This technology is part of the
S.M.A.R.T (Self Monitoring Analysis and Reporting Technology)
specification. This option is disabled by default.
• Enable SMART Reporting