Installing The Heatsink Assembly - Dell Latitude 5424 Rugged Owner's Manual

NOTE: Discreet and UMA bases have different types of heatsink assembly.

Installing the Heatsink assembly

1 Install the heatsink assembly [1] in the computer and tighten the single 'M1.6*5' [2] screw near the CPU.
2 Install the six 'M2.5*5' cap screws [3] on the thermal module securing the thermal module to the system board.
3 Route the antennae cables along the routing channel on the heatsink pipe.
134 Removing and installing components