Avoiding An Incident Or Route Feature Using The Route Bar; Adding A Stop To Your Route From The Current Route Menu - TomTom BRIDGE User Manual

In Route Planning in the Settings Menu, you can set how each route feature is handled when a new
route is planned.
To avoid a feature on your route, do the following.
1. Select the Main Menu button to open the Main Menu.
2. Select Current Route.
3. Select Avoid toll roads and More.
A screen opens showing a list of the features you can avoid. The features found on your route
are highlighted.
4. Select the feature that you want to avoid.
5. Select OK.
A new is found that avoids the route feature. The new route is shown on the map view.
Note: It may not be possible to find an alternative route around the route feature if none
exists.
Guidance to your destination resumes. As soon as you start driving, the guidance view is shown
automatically.

Avoiding an incident or route feature using the route bar

You can avoid an incident or route feature that is on your route.
Note: It may not be possible to find an alternative route around the incident or route feature if
none exists.
1. In the route bar, select the symbol for the route feature you want to avoid.
2. The route feature is shown on the map together with the pop-up menu.
3. Select Avoid in the pop-up menu.
A new route is found that avoids the route feature.

Adding a stop to your route from the current route menu

1. In the Main Menu, select Current Route.
2. Select Add Stop to Route.
The map view is shown.
3. To select a stop, do one of the following steps:
Zoom in on the map, then press and hold to select a location. In the pop-up menu, select

Add.
93