Electric Motor Components - MULTIQUIP MP3 Operation And Parts Manual

Figure 3 shows the location of the basic components of
the electric motor. Listed below is a brief explanation of
each component.
1. Power ON/OFF Switch — To start up the saw, raise
the switch safety cover and place the ON/OFF switch
in the ON (up) position. To shut down the saw, place
the ON/OFF switch in the OFF (down) position.
2. Brush Caps (2) — Protect the carbon brushes.
3. Motor Air Intake Cover — Remove to access the
carbon brushes.
4. Air Filter — Reusable, washable, foam air filter
designed to protect the motor from damage due to
high-speed dust intake.
5. Electric Motor — Universal, 3 hp, 115-volt, electric
motor.
6. Carbon Brushes (2) — Prevent carbon buildup inside
the motor. Replace carbon brushes immediately when
they become worn or damaged.
PAGE 16 — MP3 MASONRY SAW • OPERATION AND PARTS MANUAL — REV. #1 (01/25/19)
1
Figure 3. Electric Motor Components

ELECTRIC MOTOR COMPONENTS

2
5
6
3
4