Siemens OPTISET NI-1200 Operating Manual page 52

Issue 5, June 1999
Do Not Disturb
Do Not Disturb is a local feature that causes the Optiset terminal to
reject all incoming voice calls. A Do Not Disturb feature key will
have been programmed if this feature is available to you. The
Status light associated with the Do Not Disturb key lights when the
feature is activated. The Status light goes dark when the key is
pressed again to turn the feature off.
If your Optiset terminal is being used as an EKTS phone, Do Not
Disturb rejects only calls to your primary line appearance. Those
calls still will be presented to the other phones in the EKTS group.
If you have the Call Logging feature, unanswered and rejected
incoming calls still will be logged even if Do Not Disturb is activated.
If the terminal is used as an EKTS phone. only calls on the primary
call appearance will be logged.
Download
Your Optiset terminal is capable of receiving configuration updates
downloaded directly from the central-office switching system, if the
switching system supports such downloads. A download may
update Feature Identification Numbers (FIN) for various menu
features, as well as such CPE parameters as Call Appearance IDs
and the mapping of feature keys on your terminal, unless those key
assignments are protected.
If your terminal should display the "New download available"
message. you can select the Clear download msg? menu option to
clear the message. Then, either consult the person responsible for
maintaining your Optiset terminal. or refer to document 1275­
00050, Opliset NI-1200 ISDN Desktop Terminal Installation, Setup,
and Programming Guide, for instructions on how to request the
download.
Issue 5, June 1999
Fast Transfer/OMS Fast Transfer
Fast Transfer, when enabled, allows you to complete the transfer of
a call by simply hanging up after the party to receive the transfer
has answered. If the transfer fails after you hang up, the transfer
call is canceled, the Optiset terminal sounds an error tone, and the
original call remains on hold. You may then reattempt the transfer
or retrieve the held call.
OMS Fast Transfer is equivalent to the generic Fast Transfer
feature but is designed to operate with OMS switching systems.
Check with the person who installed your Optiset terminal, or the
one who maintains it, to determine which Fast Transfer feature is
enabled on your terminal.
Feature Indicator/Speed Dial
Speed Dial feature keys on your Optiset terminal can be
programmed so that the associated status light represent another
function. For example, if your terminal is subscribed to a Message
Wailing feature provided by your local telephone operating
company, a status light can be a programmed to turn on when a
Message Waiting Feature Identification Number (FIN) is received
from the switching system. The associated Speed Dial key might
be programmed to dial a message server to retrieve the message.
When you press the Feature Indicator/Speed Dial key, the Optiset
terminal places a call on an idle prime line appearance. However,
unlike a normal Speed Dial key, pressing this key will not turn on
the associated status light.
Feature
Key
Inspection
If your Optiset terminal is programmed with a Feature Key
Inspection (FKI) key, this key allows you to inspect or verify the
definition of a local or system feature key. The key toggles the
Inspection mode on and off. The status light associated with the
FKI key turns on and the message "Inspect is on" is displayed when
the Inspection mode is on.
When the Inspection mode is on, you can press any other feature
or line key to display current information about that key. Four types
92 1275·00030
1275·00030 93