Variable Forwarding - Siemens Hicom 300 E User Manual

Step by Step
Service Menu
Destinatio ns?
Call forwarding?
Variable Umleitung
Next forwardin g type? >
Fixed fo rwarding off
Next forwardin g type? >
Fixed fo rwarding off
22805 Harald Meier
FWD-ALL -INT o ff

Variable forwarding

W ith variable forwarding you can choose b et ween 6 dif-
ferent types of call forwarding:
• Variable forwarding (uncond itional forwarding)
• Forwarding for internal
• Forwarding for external
• Forwarding for busy
• Forwarding after timeout
• Forwarding for busy/after timeout
The forwarding types are mutually exclusive except for
forwarding for internal and forwarding for external. You
can program a forwarding destination for both of the
two exceptions and thus activate them both.
Example:
You had activated variable forwarding. You now program
and thus activate forwarding after timeout. Variable for-
warding is automatically deactivated and its forwarding
destination is deleted.
Selection of a variable forwarding type
Select the items Destinations and Forwarding in the
Service Menu.
Press the key. The lamp lights up.
Confirm.
Confirm.
"Variable forwarding" will be offered first.
Output on first line.
AUS
Output on second line.
Confirm to select the next forwarding t ype.
Output on first line.
Output on second line.
or if you have already programmed a fixed forwarding des-
tination
Output on first line.
Output on second line.
>
Confirm to select the next variable forwarding type
Output on first line.
Forwarding calls
57 57 57 57