Dedicated Intercom Call - Siemens 300Series User Manual

Note: A com group speaker call will override Forwarding, Do Not
Disturb mode, and both Station and Pilot Hunting. (See
"Forwarding" on page 5-1, "Do Not Disturb" on page 6-1, and
"Hunt Groups" on page 7-5.)
You cannot transfer a com group speaker call or place it on
consultation hold. In addition, you cannot dial an account
number during a com group speaker call.
If the member you are calling is busy on another line, the call
is converted to a regular call.

Dedicated Intercom Call

Dedicated Intercom Call lets you dial a single digit (0 through 9) to
make a call to another phone. It uses one line on your phone set up as
a dedicated intercom call line. The called party must also be set up as
a member of your dedicated intercom group.
If the called party's phone is busy, it will receive an alerting tone and
the status light next to its Dedicated Intercom (INT) key will flash. The
called party can then hang up, and the call will be answered
automatically.
To call a member
of your dedicated
intercom group
Press the Dedicated Intercom (INT) key.
Dial the dedicated intercom group
member's number (0 through 9).
After the called party answers, begin
speaking.
Making Calls 3-21