Product Installation; Acs Io Installation Methods; Attaching The Acs Io The Wall - LG V-NET ACS IO Installation & User Manual

PRODUCT INSTALLATION

8
PRODUCT INSTALLATION

ACS IO installation methods

There are two methods as seen below for attaching the ACS IO to the wall.

Attaching the ACS IO the wall

The ACS IO can be installed by attaching it to the wall.
• First, decide a suitable place to install the ACS IO.
- Make sure it is a place that is suitable for connecting the IO, power source, and RS485 cables.
• Use a screwdriver to attach it to the wall.
• It can be attached according to the location of installation as shown in the illustration.
! CAUTION
• Screw Spec : Screw head height - 2.00 ~ 1.75 (mm)
Screw head diameter - 7.05 ~ 5.50 (mm)
AO2
AO1
AC S IO Mo dul e
DO2
DO1
UI4
UI3
UI2
UI1
AO4
AO3
DI3
DI1 DI2
DO3