Making A Call; Before Making A Call; Dialling Modes - Samsung OfficeServ ITP-5012L User Manual

MAKING A CALL

1. Before Making a Call

The calling methods and features are summarized in the following table.
The detailed description corresponding to each feature then follows.
Call Type
Calling method
Feature

Dialling Modes

The ITP-5012L IP phone allows you to choose between 2 dialling modes, Overlap and
Enbloc. Refer to the Application Menus/Configuration section later in the manual for more
information.
Overlap dialling allows you to commence the calling process immediately you dial the first digit.
!
If you dial without lifting the handset first, the IP phone will automatically turn on speakerphone.
Enbloc dialling allows you to enter the number first, thus giving you time to review and change
!
the number. You then press the [Send] button to make the call using the handset or
speakerphone.
The following features descriptions for making calls is based on the Enbloc dialling mode.
© SAMSUNG Electronics Co., Ltd.
Intercom Calls
Handset, speakerphone
- Making an intercom call
- Intercom callback
- Call waiting
- Calling the system operator
- Calling from the lists of the latest called numbers/incoming calls
- Dialling from recent call log
- Speed dialling
- Searching/Dialling from the System directories by name
- Conference Call
Outside Calls
- Making an outside call
- Redial
- Automatic redial
- Trunk line callback
- Trunk line recall
- Call waiting in a parking orbit
- Changing Trunk line
level/Using a billing code
- Save/Repeat
- Calling the saved number
Page 33