Network Settings - Samsung OfficeServ ITP-5012L User Manual

3. Network Settings

You can verify or change the network environment.
1.
Use the [
the [2. Network] menu and press
the [Enter] button.
2.
Move to the [1. Mode] submenu and
press the [Enter] button.
3.
Select [1. Manual IP] menu to
directly enter the phone's IP address.
Select [2. DHCP] to let your data network
"
automatically allocate the IP address.
The IP Address, Subnet Mask,
and Gateway values are automatically
set and are not displayed on the LCD screen.
Select [3. PPPoE] to use a broadband network such
"
as ADSL. In this case, you should enter the
ID and password which was given from
broadband network supplier.
4.
After selecting the required mode a message
confirming the mode is displayed for 2
seconds.
© SAMSUNG Electronics Co., Ltd.
]/[ ] button to move to
GETTING STARTED
Page 27