Operating The Telephone With The Optipoint Display Module; Using The Display; Call View Start Display - Siemens HIPATH 8000 OPTIPOINT410 User Manual

Step by Step

Operating the Telephone with the optiPoint display module

Operating the Telephone with the
optiPoint display module
Product support for the optiPoint display module
by Siemens Service was discontinued at the end
of 2006.

Using the Display

To select the control elements on the display, use the
stylus provided or a similar object that will not damage
the display surface.
Please read the instructions on

Call View Start Display

Prerequisite: "Use DSM" is enabled (
the telephone is not locked (
When you connect the telephone for the first time or re-
start it a message appears prompting you to press the
display to start Call Control. The idle display appears.
Press the Menu icon to see which menu options are
available when the telephone is in the idle state.
Call Control
Mon 07/03/05 11:34AM
+44 123456 78910
Contacts
page 203.
page 115).
Call Log
Redial Last No.
Group Pickup
Forward Calls
Do not disturb
Cancel Callbacks
Ringer on
Setup
page 105) and
131