Usb Operations - Clarion M502 Owner's Manual & Installation Manual

Bluetooth
Table of Contents

Advertisement

SiriusXM Satallite Radio Operations
explained below.
1. In SiriusXM mode, press [DISP] button on
the remote control.
Each time you press this button, the display
changes as shown below.
Band/Channel number/channel name =>
Artist Name => Song Title=> Content Info
=> Category Name => Clock => Band/
Channel number/channel name
* If there is no text information,nothing will be
displayed.
Parental Lock / Unlock
The SiriusXM Parental Control feature allows
you to control access to channels that you
consider inappropriate for younger listener.
When enabled, the Parental Control feature
requires you to enter a password to tune to
the locked channels. Information on setting up
the password, setting up the channels to be
locked, and the method to access the locked
channels is described below.
1. Long-press [CONTROL] knob and select
ADJUST, then press [CONTROL] knob to
enter and press [CONTROL] knob (right) to
select "PARENTAL PASSWORD".
P r e s s [ C O N T R O L ] k n o b t o c h a n g e
p a s s w o r d . E n t e r o l d p a s s w o r d , n e w
p a s s w o r d . T o e n t e r c o d e , r o t a t e
[CONTROL] knob to decide number and
[CONTROL] knob (left/right) to select digit.
Each time you need to press and hold
[CONTROL] knob to confirm password.
(Original password is "0000", after input four
numbers, then long-press the [CONTROL]
knob)
2. Long-press [CONTROL] knob and select
ADJUST, then press [CONTROL] knob to
enter and press [CONTROL] knob (right) to
select "LOCK CH" and press [CONTROL]
knob to start to lock channel. You will be
asked to input password. Enter password
and "LOCK" will be displayed if it is
successful.
3. Long-press [CONTROL] knob and select
ADJUST, then press [CONTROL] knob to
enter and press [CONTROL] knob (right)
to select "UNLOCKCH". Enter password and
you can unlock the channel.
4. For accessing the locked channels, select
channel by "DIRECT SELECT".
Press and hold [CONTROL] and select
"DIRECT SELECT" by pressing [CONTROL]
knob. Input desired locked channel (need to
input 3 digit) and input password, then you
can tune to that locked channel.

USB Operations

1. Insert a USB device into the rear of the unit
USB cable.
When connecting a USB device, the unit will
read the files automatically.
2. To remove the USB device, you should first
select another source or turn off the power,
in order to avoid damaging the USB device.
Then take off the USB device. Move the
cover to the right.
Pausing play
1. Press the [
] button on the remote control
to pause play.
"PAUSE" appears in the display.
2. To resume MP3/WMA play, press the [
]
button on the remote control again.
Selecting a track
Track-up
1. Press the [CONTROL] knob (right) on the
panel or [
] button on the remote control to
move to the beginning of the next track.
2. Each time you press the [CONTROL] knob
(right) on the panel or [
] button on the
remote control, the track advances to the
beginning of the next track.
Track-down
1. Press the [CONTROL] knob (left) on the
panel or [
] button on the remote control
to move back to the beginning of the current
track.
2. Press the [CONTROL] knob (left) on the
panel or [
] button on the remote control
twice to move back to the beginning of the
previous track.
Fast-forward/Fast-reverse
Fast-forward
Press and hold the [CONTROL] knob (right) on
the panel or [
] button on the remote control.
Fast-reverse
Press and hold the [CONTROL] knob (left) on
the panel or [
] button on the remote control.
* For MP3/WMA USB device, it takes some
time until the start of searching and between
tracks. In addition, some errors may occur in
the play time.
Folder Select
This function allows you to select a folder
containing MP3/WMA files and start playing
from the first track in the folder.
1. Press and hold [CONTROL] knob (up) on the
panel.
Press and hold [CONTROL] knob (up) on the
panel to move the next folder.
2. To select a track, press the [CONTROL]
knob (right / left) on the panel or [
,
]
button on the remote control.
Search Function
1. Press the [CONTROL] knob (up) to enter
FOLD SCH mode, and press [CONTROL]
knob (center) to comfirm, then rotate
[CONTROL] knob to select the folder list
search mode.
2. Rotate the [CONTROL] knob to select a folder.
3. Press the [CONTROL] button (center) to
enter the file list search mode. And then the
track list appears in the display.
4. Turn the [CONTROL] knob to select a track.
5. Press the [CONTROL] knob (center) to play.
* When play back MP3 / WMA file, this
function is performed in the current folder.
Top function
The top function resets the USB player to the
first track of the USB device. Press and hold the
[ CONTROL ] knob (down) to play the first track
(track No. 1) on the USB device.
M502
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents