Removing The Source Unit; Wiring And Connections; Trim Ring - Clarion M502 Owner's Manual & Installation Manual

Method B
M5x6
Dashboard
Mounting Frame
1. Insert this unit directly to the opening of the
dashboard.
2. Place M5×6 cylindrical screw through the
holes of the mounting frame located inside
the opening to holes of the unit and fasten
the screws to left & right.
Trim ring installation
Attach the trim ring around the front panel.
15
M502

6) Removing the Source Unit

Disassemble trim ring
1. Push the trim ring to right and pull out the
right part.
2. Push the trim ring to left and pull out the
left part.
Disassemble the unit
1. Switch off the power.
2. Remove the trim ring.
3. Insert the removal keys straight back until
they lock,then pull the unit out.
4. Disconnect all the wires.

7) Wiring and Connections

Gray
Red
Black
Black
Black USB connector
Steering wheel
control terminal
External microphone
(RCB-199:Sold by
separately)
(Black)
Wired remotes
Antenna
(Black)
(Black)
(Black)
SiriusXM
White
Rear audio output (Left) /Subwoofer output 1
Rear audio output (Right) /Subwoofer output 2
Red
White
Left
Front audio output terminal
Right
Red
AUX L
AUX R
4 Channel Amplifier
Refer to next page
SiriusXM ConnectTM Vehicle Tuner to be
connected:Sold separately