System Setup - Clarion M502 Owner's Manual & Installation Manual

System Setup

At all mode, press and hold [CONTROL] knob (center
long press), and rotate the [CONTROL] knob choose
ADJUST, then press the [CONTROL] knob to enter
system setup. Press [CONTROL] knob (left / right) to
select options, rotate the [CONTROL] knob to adjust.
PCH MEMO (RADIO/SIRIUSXM mode)
Rotate the [CONTROL] knob to choose PCH
1 / PCH 2 / PCH 3 / PCH 4 / PCH 5 or PCH 6,
press and hold [CONTROL] knob (center long
press) to store it in the memory.
CLOCK
Press the [CONTROL] knob (right) to choose
minute, and rotate the [CONTROL] knob to
set minute.
Press the [CONTROL] knob (left) to choose
hour, and rotate the [CONTROL] knob to set
hour.
Then long press [CONTROL] knob (center) to
confirm the time setting.
DX/LO (RADIO mode)
Rotate the [CONTROL] knob to choose radio
local or distant at RADIO mode.
• LO: Only stations with strong signal can be
received.
• DX: Stations with strong and weak signals
can be received.
SELECT (BT mode)
T h i s " S E L E C T " m e n u i s i n t e n d e d t o
automatically paired by selecting a mobile
phone was stored.
This unit can store three mobile phones. The
mobile phone will be stored in paired order
to the unit. The mobile phone can be stored
up to three. The fourth mobile phone can not
be stored. If you want to store a fourth mobile
phone, please delete unwanted mobile phone
from "SELETE" menu.
1. Rotate the [CONTROL] knob to choose the
pair mobile phone name from the pairing
list.
2. Press and hold the [CONTROL] knob to
confirm.
5
M502
DELETE (BT mode)
1. Rotate the [CONTROL] knob to choose the
paired mobile phone name from the pairing
list.
2. Press and hold the [CONTROL] knob to
confirm.
DISCON (BT mode)
Disconnect currently connected mobile phone.
1. Rotate the [CONTROL] knob, mobile phone
displays are currently connected.
2. Press and hold the [CONTROL] knob to
disconnect.
PASSWORD (SIRIUSXM mode)
Press the [CONTROL] knob to enter old
password, rotate the [CONTROL] knob to select
a digit, press the [CONTROL] knob (left / right)
to move the cursor. Press the [CONTROL] knob
to confirm after input all 4 digit. Then input a new
4-digit number as above. (Original password:
0000)
LOCK (SIRIUSXM mode)
Press the [CONTROL] knob to lock current
station, rotate the [CONTROL] the knob to
select a digit, press the [CONTROL] knob (left
/ right) to move the cursor. Long press the knob
to confirm after input all 4 digit password.
UNLOCK (SIRIUSXM mode)
Press the [CONTROL] knob to unlock all locked
stations, rotate the [CONTROL] knob to select
a digit, press the [CONTROL] knob (left / right)
to move the cursor. Press the [CONTROL] knob
to confirm after input all 4 digit password.
UNSKIP (SIRIUSXM mode)
Press and hold the [CONTROL] knob to unskip
all channels.
AUX SENS (AUX mode)
Rotate the [CONTROL] knob to choose AUX
input sensitivity LOW, MID or HIGH at AUX
mode.
MIC SEL (BT mode)
R ot at e t he [C O NT RO L ] kn o b t o c h o o se
microphone EXTERNAL or INTERNAL.
System Setup
MIC GAIN (BT mode)
Rotate the [CONTROL] knob to choose Mic
gain: 1, 2, 3, 4, 5.
You can change the gain of MIC when a
telephone partner cannot hear your voice.
TONE SEL (BT mode)
You can get mobile phone ring tone from the
speaker.
Rotate the [CONTROL] knob to choose
AUTO or INTERNAL.
• AUTO:
Mobile phone ring tone from the speaker.
• INTERNAL:
The unit original ring tone from the speaker.
AUTO ANS (BT mode)
To answer incoming calls automatically.
Rotate the [CONTROL] knob to choose
AUTO ANS ON or OFF.
AUTO CON (BT mode): ON/OFF
Rotate the [CONTROL] knob to choose
AUTO CON ON or OFF.
PIN CODE
Press the [CONTROL] knob, rotate the
[CONTROL] knob to select a digit, press
the [CONTROL] knob (left / right) to move
the cursor. Press the [CONTROL] knob to
confirm.
The PIN CODE default setting is " 0000 ".
SCRN SVR: ON/OFF
Rotate the [CONTROL] knob to choose
SCRN SVR (screen saver) ON or OFF.
SCROLL: ON/OFF
For track information that is longer than the
display panel:
When SCROLL is ON, the LCD will display
ID3 TAG information cyclely, e.g.: TRACK-
> F O L D E R - > F I L E - > A L B U M - > T I T L E -
>ARTIST->TRACK->...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other ID3
TAG information by pressing [DISP] button on
the remote control.
S-CTRL (iPod mode) : ON/OFF
Rotate the [CONTROL] knob to choose S-CTRL
(Simple control) ON or OFF.
* Refer to P9.
DIMMER: ON/OFF
Rotate the [CONTROL] knob to choose DIMMER
ON or OFF.
• ON: LCD dimmer is active when small light of
vehicle is turned ON.
• OFF: LCD always maximum brightness
regardless of the vehicle small light.
REAR/S-W
Rotate the [CONTROL] knob to choose REAR
or S-WOOFER(SUB-WOOFER).
SW PHASE
R o t a t e t h e [ C O N T R O L ] k n o b t o c h o o s e
REVERSE or NORMAL.
BEEP: ON/OFF
Rotate the [CONTROL] knob to choose button
beep sound ON or OFF.
12/24H
Rotate the [CONTROL] knob to choose time
format: 12 or 24 hours.