Activating/Deactivating Audio Settings - Siemens Gigaset 3000 Operating Instructions Manual

Audio settings
Note:
The symbol
have deactivated the ringer (level 0).
A call pickup is signalled by a short ringer tone if the
handset is part of a call pickup group. Ringer tones 1-5
are, therefore, recommended in a call pickup group.

Activating/deactivating audio settings

The following audio settings are all activated and deacti-
vated using the same principle:
– Beep (for note, see page 47)
– key beeps
– batt. low beep
– confirmation beep
The "key beeps" function is used by way of example here to
describe setting procedures:
Press the display keys to set the re-
quired volume.
You can select one of five ringer vol-
umes, the crescendo ring (= C) or no
ringer tone (= 0).
Confirm the setting.
Use the display key to jump to the next
menu level up.
&
appears in the first display line if you
Press the menu key.
Confirm the selection.
Scroll to
Confirm the selection.
Scroll to
Confirm the selection.
The activated function is indicated by
a check mark symbol.
is displayed.
46
.
.