Distance From Top Of Projected Image To Wall Plate - Epson BrightLink 710Ui Installation Manual

Distance from top of projected image to wall plate

The distance (c) from the top of the projected image to the bottom mounting holes on the wall plate is the
number given when the vertical slide is set to the base position, as shown below.
Match the notch on the wall mount to the position of the stamp on the wall plate.
Installation measurement tables
Use the following installation measurement tables for your projector.
The measurements may differ depending on the location where you place the
projector.
When projecting in Tele mode, the quality of the projected images may decrease.
Base position
Notch on mount arm
18
Stamp on plate