Accept Call; Reject Call - Siemens SL45 User Manual

14

Accept call

The phone must be switched on to
receive calls (in standby mode).
Answer
or, if call divert is set:
Answer
accept a call with:
or
divert the call.
End call
Press.

Reject call

or
The caller hears the busy signal.
Diverts, say, to the mailbox, if
this diversion has been set, see
p. 55.
Making a phone call
+498912345
Reject
Divert
or with
Accepting with stereo headphones
If a call comes in, the music is automatically
interrupted. Press the PTT key to accept the
call or to end the call (see p. 26).
Accepting with Answer.message
You must have recorded and activated an
Answer.message.
When a call comes in, press the dictation
key briefly. The call is accepted and an
Answer.message is played without your
having to speak (see also p. 30).
The numbers of calls that have been
received and missed are stored for call
backpurposes, see p. 49.
You can also press any key to accept a call,
for the setting, see "Any key answer", p. 57.
An incoming call will interrupt any other use
of the phone.
For data calls and fax calls see p. 68.
For functions during the call
see p. 15.
Switch off the ringer for the current call:
Hold down.
The call is displayed. The caller
hears the dialling tone.