Specifications; Factory Settings - Siemens Gigaset SL 740 Operating Manual

Appendix

Specifications

Recommended battery
(Valid when these operating instructions were
printed)
Lithium-Ion (LiIon), 700 mAh
The device is supplied only with a
recommended battery.
Handset operating times/charging
times
Capacity 700 mAh
Standby time approx. 115 hours (4 days)
Calling time approx. 24 hours
Charging time approx. 2 hours
These operating and charging times apply
only when using the recommended
battery.
Power consumption
In standby: approx. 2.5 Watt
During a call:
approx. 2 Watt
General technical data
DECT standard is supported
GAP standard is supported
No. of channels 60 duplex channels
Radio frequency 1880–1900 MHz
range
Duplex method Time multiplex,
10 ms frame length
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission 10 mW, average power per
power channel
Range up to 300 m outdoors,
up to 50 m indoors
58
Power supply/Base 230 V ~/ 50 Hz
station
Environmental +5 °C to +45 °C;
conditions for
20 % to 75 % humidity
operation
Dialling mode DTMF (tone dialling)/
DP (dial pulsing)
Flash time 250 ms
Dimensions/Base 143 x 118 x 50 mm
station
(L x W x H)
Dimensions/ 132 x 52 x 22 mm
Handset
(L x W x H)
Weight/Base base 167 g
station
Weight/Handset 110 g
with battery

Factory settings

Factory settings of the base station
Function
First ring suppressed on
Flash time
Call charges
Internal listening in
Charge per unit
Line seizure: Pause
List type Caller list
Handset:
Authorisation
restriction (internal/
external)
Handset: Name
Network provider
preselection
Emergency
numbers: Own
Pause: Recall key
Pause: Access code
Factory Page
setting
page 49
250 ms page 54
00,00 page 20
off page 42
00,00 page 20
3 s page 55
Missed Calls page 17
none page 52
"INT 1" to page 42
"INT 6"
country- page 19
specific
deleted page 52
800 ms page 55
3 s page 55