Service (Customer Care) - Siemens Gigaset SL 740 Operating Manual

Your caller on the telephone cannot hear
you.
You have pressed the
handset.
£
Switch on the microphone again (p. 11).
The caller's telephone number is not
displayed although CLIP is set.
Calling line identification is not enabled.
£
The caller should ask his network provider
to enable the identification of his number (CLI).
You hear an error tone when keying an input
(a descending tone sequence)
The action has failed or the input is
incorrect.
£
Repeat the action or input.
Watch the display and if necessary refer to the
operating instructions.
You cannot receive/send any MMS messages
1. Mobile phone operators and fixed network
providers of MMS services have no agree-
ment to work together.
£
Contact your fixed network MMS provi-
der for more information.
2. Your telephone is stored with your MMS pro-
vider as having no fixed network MMS func-
tionality, i.e. you are no longer registered
with the provider.
£
Register the terminal (again) for MMS
reception.
You cannot listen to the network mailbox.
Your phone system is set for pulse dialling.
£
Set your phone system to tone dialling
(p. 55).
2. The system PIN is still set to "0000".
£
Set system PIN that differs from 0000
(p. 52).
Display does not change to view mode when
you open the camera function (
There is insufficient memory.
£
Delete no longer required data in the File
Manager (page 36) or MM lists (page 32).
9
key. This mutes the
¢
v ë

Service (Customer Care)

Our Online Support on the Internet:
www.siemens-mobile.com/
gigasetcustomercare
In some countries repair and replace serv-
ices are impossible where the products are
not sold through our authorised dealers.
Your Gigaset is designed for operation in
your country, as indicated on the packag-
ing and on the device itself. Country-spe-
cific conditions have been taken into
account. If you have any questions about
the differences between the public phone
networks, please contact your specialist
dealer or network provider.
The CE mark attests to the phone's compli-
ance with the essential requirements of
the R&TTE directive.
Excerpt from the original declaration:
"We, Siemens AG, declare, that the above
mentioned product is manufactured according
to our Full Quality Assurance System certified
by CETECOM ICT Services GmbH with ANNEX V
of the R&TTE-Directive 99/5/EC. The
presumption of conformity with the essential
requirements regarding Council Directive 99/5/
EC is ensured"
Senior Approvals Manager
The Declaration of Conformity (DoC) has been
signed. In case of need, a copy of the original
DoC can be made available via the company
hotline.
)
Appendix
57