Connecting The Base Station; To A Pabx; Dialling Modes And Flash Times; Storing The Access Code (Outside Line Code) - Siemens Gigaset SL 740 Operating Manual

Connecting the base station to a PABX

Connecting the base station

to a PABX

The following settings are only necessary
if your PABX requires them, please refer to
the operating instructions for your PABX.
You cannot send or receive SMS/ MMS
messages on PABXs that do not support
Calling Line Identification.

Dialling modes and flash times

The current setting is marked with ‰.
1. Step: Changing the dialling mode
The following dialling modes can be
selected:
u
Tone dialling (DTMF),
u
DTMF earth (country-specific),
u
Pulse dialling (DP).
¢ ¢ ¢
v Ð
Base
¢
Dialling Mode
s
Select dialling mode and
press
OK
a
Long press (idle status).
2. Step: Setting the flash time
¢ ¢ ¢
v Ð
Base
¢
Recall
s
Select flash time and press
(‰ = on).
a
Long press (idle status).
54
Add. Features
(‰ = on).
Add. Features
OK
Storing the access code
(outside line code)
Precondition: Your PABX may require you
to enter an access code before the
telephone number when making an
external call, e. g. "0".
¢ ¢ ¢
v Ð
Base
¢
Access Code
~ ©
Enter or change the access
code (maximum 3 digits) and
press the display key.
Save Entry Select and press
a
Long press (idle status).
If you have stored an access code, the
following will apply:
u
The access code is inserted
automatically when dialling from the
following lists: emergency numbers,
SMS service centre numbers, calls list.
u
You have to add the access code
yourself during dialling and when
entering directory, emergency/call
director numbers and SMS service
centre numbers manually.
u
If you use the telephone number from
the directory when sending a text
message, you have to delete the access
code.
You can delete an access code with X.
u
To insert a pause, press ©, s Insert
or ©, s Insert Recall
Pause
OK
Add. Features
.
OK
.
OK