Table of Contents
Advertisement
16
Security
T
C
¢
¢
Security
¢
Select function.
Change PIN2
(Display only if PIN 2 is available).
Proceed as with
Chg.phonecode
(Change phone code)
You define the phone code
(4-8 digits) when you call up a
phone-code protected function for
the first time (e.g.
It is then valid for all phone-code
protected functions.
Following the third unsuccessful at-
tempt, access to the phone code and
the functions that use it is denied. If
this occurs, contact Siemens Service
(p. 55).
Clearing SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN) provided by
your service provider with the
SIM card in accordance with the in-
structions. If the PUK (MASTER PIN)
has been lost, please contact your
service provider.
¢
Codes
Change
PIN.
Direct
call, p. 47).
Preventing accidental
activation
Even if PIN control is deactivated
(p. 15) confirmation is required to
switch on the phone.
This prevents accidental activation
of the phone, e.g. when you are
carrying it in a bag or when you are
travelling in an aircraft.
B
Press and hold On/Off/End
key.
C
Press. The phone
switches on.
Press this key or take no
§Cancel§
action. The phone does
not switch on.
Advertisement
Table of Contents
