Clearing The Combustion Chamber - Stihl MS 462 C-M Instruction Manual

18 Troubleshooting

18.2 Clearing the Combustion Chamber

► Engage the chain brake.
1 1
► Rotate the shroud fasteners (1) a quarter turn
counterclockwise.
► Remove the shroud (2).
► Pull off the spark plug boot (3).
► Unscrew the spark plug.
► Dry the spark plug.
WARNING
Unconfined sparks may occur if the starter grip is pulled after
the spark plug boot has been removed. Sparks may cause a
fire or an explosion in an easily combustible or explosive
environment. This can result in serious or fatal injuries and
damage to property.
► Move the Master Control lever to position
there before pulling the starter grip.
► Move the Master Control lever to position
there.
► Pull the starter grip (3) and guide it back several times.
The combustion chamber is cleared.
► Insert and tighten down the spark plug.
0458-790-0121-A
3
► Connect the spark plug boot (3) and press it down firmly.
► Place the shroud (2) in position.
► Rotate the shroud fasteners (1) clockwise until you hear a
click.
The shroud fasteners are locked.
and hold it
and hold it
3
English
39