Starting And Stopping The Engine; Starting The Engine - Stihl MS 462 C-M Instruction Manual

Hide thumbs Also See for MS 462 C-M:
Table of Contents

Advertisement

English
1
2
► Place the cap in the filler opening so that mark (1) lines up
with mark (2).
► Press the cap down and rotate it clockwise as far as stop.
The cap snaps into place. The mark (1) is in line with mark
(4) and points to mark (3).
► Check to see if the fuel tank cap can be pulled upwards
and off.
► If the fuel tank cap cannot be pulled upwards and off: Fold
the grip flush with the top of the cap.
The fuel tank is closed.
If the fuel tank cap can be pulled upwards and off, perform
the following steps:
► Place the fuel tank cap in the filler opening – in any
position.
A
B
► Press the cap down and rotate it clockwise as far as stop.
► Press the cap down and rotate it counterclockwise until
mark (1) points to mark (2).
20
► Now try again to close the fuel tank.
► If the fuel tank still cannot be closed properly: Do not use
4
the chainsaw and contact a STIHL dealer for assistance.
The chainsaw is not in a safe condition.
1

9 Starting and Stopping the Engine

9.1
3
► Engage the chain brake (2).
► Pull off the chain guard (scabbard).
► Depress the decompression valve (1).
► Move the Master Control lever (3) to position .
If the engine is at ambient temperature:
C
1
2
► Press down the throttle trigger lockout (5) and hold it
there.
9 Starting and Stopping the Engine

Starting the Engine

2
1
3
4
3
5
0458-790-0121-A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents