Transport - Genie S-120 Operators Manual With Maintenance Information

Operator's Manual
Transport Instructions
Transport Instructions
Observe and Obey:
Transport vehicle must be parked on a level
surface.
Transport vehicle must be secured to prevent
rolling while machine is being loaded.
Be sure vehicle capacity, loading surfaces and
straps or lines are sufficient to withstand
machine weight (see Specifications section).
Be sure the turntable is secured with the
turntable rotation lock before transporting. Be
sure to unlock the turntable for operation.
Securing to Truck or Trailer for
Transit
Always use the turntable rotation lock pin each
time the machine is transported.
Always chock machine wheels in preparation for

transport.

Use tie points on drive chassis for anchoring down
to transport surface.
Use chains or straps of ample load capacity.
Turn key switch to the
before transporting.
Inspect entire machine for loose or unsecured
items.
26
position and remove key
OFF
Genie S-120 & Genie S-125
First Edition · Fourth Printing
Free-wheel Configuration for
Winching
Chock wheels to prevent machine from rolling.
4WD models: Release wheel brakes by turning
over all four torque hub disconnect caps (see
below).
Be sure winch line is properly secured to drive
chassis tie points and path is clear of all
obstructions.
Reverse procedures described to re-engage
brakes.
Transport configuration: S-120
Transport configuration: S-125
Disengage
Position
Engage
Position
Part No. 62756