Product Overview - Stanley STHT77341 Instructions Manual

Contents
• User Safety
• Contents

• Product Overview

• Keypad, Modes, and LED
• Applications
• Batteries and Power
• Set Up
• Operation
• Accuracy Check and Calibration
• Specifications
Retain all sections of the manual for future reference.
User Safety
WARNING:
• Carefully read the Safety Instructions and
Product Manual before using this product.
The person responsible for the instrument
must ensure that all users understand and
adhere to these instructions.
WARNING:
• The following labels are placed on the laser
tool to inform you of the laser class for your
convenience and safety. (Text has been
translated here for your convenience.)
IEC /EN 60825-1
Complies with 21 CFR 1040.10 and 1040.11 except for
deviations pursuant to Laser Notice No. 50, dated June2007
10
L A S E R R A D I AT I O N - D O N O T
S TA R E I N T O T H E B E A M O R V I E W
D I R E C T LY W I T H
O P T I C A L I N S T R U M E N T S
C L A S S 1 L A S E R P R O D U C T
Max Output ≤1 mW @ 630 - 670 nm
STHT77341
CAUTION:
• While the laser tool is in operation, be careful
not to expose your eyes to the emitting laser
beam (red light source). Exposure to a laser
beam for an extended time may be hazardous
to your eyes.
CAUTION:
• Glasses may be supplied in some of the laser
tool kits. These are NOT certified safety glasses.
These glasses are ONLY used to enhance the
visibility of the beam in brighter environments or
at greater distances from laser source.
Product Overview
Figure A - Laser Tool
1. 1/4-20 threaded mount
2. Laser Window
3. Power /Pendulum Lock Switch
4. Slots for Quick Link Bracket Connect
5. LED/Out-of-Level Indicator
Figure B - Laser Tool Battery Location
6. 2 x AA Batteries
7. Battery Cover
Figure C - Power /Transport Lock
Figure D - Laser Modes
Figure E - Quick Link Bracket Assembly.
9. QuickLink Bracket
Figure F - Quick Link ™ Bracket Detail
Figure H - Level Beam Accuracy
Figure I - Horizontal Beam Accuracy
Figure J - Vertical Beam Accuracy