Manual Tilting; Tilt Lever - Suzuki DF100 Owner's Manual

MANUAL TILTING

If you are unable to tilt the motor using the
"Power Trim and Tilt" because of an electrical
problem or some other problem, you can move
the motor manually. To tilt the motor up or
down, turn the manual release screw A two
turns counterclockwise, move the motor to the
desired position, then retighten the release
screw.
 CAUTION
The motor is very heavy. When you tilt it
manually, you could injure your back or
slip and fall causing injury.
When you tilt the motor manually, ensure
that your grip and footing are secure and
that you are able to support the weight of
the engine.

TILT LEVER

The Tilt Lever is provided so you can support
the motor in a tilted position for non-moving
engine support.
To set the Tilt Lever:
1. Tilt the motor all the way up using the Power
Trim and Tilt.
2. Pull down the Tilt Lever as shown in the illus-
tration.
3. Lower the motor using the Power Trim and
Tilt, until the motor is supported by the Tilt
Lever.
To release the Tilt Lever, tilt the motor all the
way up using the Power Trim and Tilt "UP"
switch, and pull up the Tilt Lever.
 CAUTION
The remote Power Trim and Tilt switch
will work when the ignition switch is off. If
someone activates the switch while you
are moving the tilt lever, your hand could
be injured.
Keep all persons away from the remote
Power Trim and Tilt switch while you are
moving the tilt lever.
25