Bottom Of The Dial Controller - Samsung VL Series Full Manual

Bottom of the Dial Controller

❚
To expose the bottom of the Dial Controller, remove the bottom cover.
• Charge your Dial Controller before turning on the power.
• To charge, connect the Dial Controller to a charger or a computer USB port using a Micro USB
cable (Micro USB to Standard USB - not supplied). The LED lights when the Dial Controller is
charging and turns white when the Dial Controller is charged. You can use the Dial Controller
while it is charging.
1
DC 5V IN Jack
2
CONNECT Button
• When the battery in the Dial Controller is low, the LED on the top of the controller will blink in pink.
Recharge the battery by connecting the Controller to a charger or computer USB port using a Micro
USB cable (not supplied). (For more information about the LED display, see page 7.)
 It takes approximately 3 hours to fully charge the battery. A fully charged battery can last up to 90 days.
 Battery life is subject to conditions of use and the environment.

RESET button: When pressed, the power is turned off and then on. Used for Troubleshooting.
Connect the Micro USB cable to charge the Dial Controller
Press to connect to the Speaker.
ENG - 8
DC 5V
IN
RESET CONNECT
RESET Button
1
2