Table of Contents
Advertisement
Rear Panel Connections
• Do not plug the AC input cord into the AC outlet when plugging and unplugging connection cords.
• Be sure to connect the white plugs to the L(Left) and the red plugs to the R(Right) jacks when making connections with
the supplied cords.
• Refer to the connecting diagram in the operating instructions of Sherwood system receiver RX-801R.
LINE
PB
LINE(REC) IN, (PLAY) OUT JACKS
Connect the LINE(PLAY) OUT jacks of this unit to the TAPE(PLAY) IN jacks of your receiver and the LINE(REC) IN
jacks to the TAPE(REC) OUT jacks respectively.
SYSTEM CONNECTOR JACKS 1, 2
Connect this jack to the SYSTEM CONNECTOR jack of Sherwood system receiver RX-801R to control this unit remotely
with the remote control unit of RX-801R.
(For details, refer to the operating instructions of RX-801R)
AC INPUT CORD
Plug this cord into a wall AC outlet or the switched or unswitched AC outlet of your system component.
UNSWITCHED AC OUTLET
• You can connect audio equipment like CD player.
• Power always flows to this outlet, regardless of whether this unit is switched ON or OFF if power flows through the AC
input cord of this unit.
Note : The equipment whose power consumption exceeds 100 watts should not be connected.
CAUTION
:
TO PREVENT ELECTRIC SHOCK, DO NOT
REC
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER-SERVICING TO QUALIFIED SERVICE PERSONNEL.
L
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
SYSTEM
CONNECTOR
Dolby Laboratories.
SER. NO
R
SYSTEM
CONNECTOR
1
SYSTEM
ON/STANDBY
PB-TAPE-REC
5
AC INPUT
230V ~ 50Hz
10W
MODEL NO. DS - 801
CASSETTE DECK
UNSWITCHED
230V~50Hz
DESIGNED IN USA
100W MAX
ASSEMBLED IN KOREA
2
RECEIVER(RX-801R)
PERSONAL COMPONENT SYSTEM/AM-FM STEREO RECEIVER RX-801R
EON-TA
EON-NEWS
STANDBY/TIMER
PHONES
SOUND
TUNING
BAND
TIMER
MEMORY
FUNCTION
MULTI CONTROL
VOLUME
Advertisement
Table of Contents
