Cd Synchro Recording - Sherwood DS-801 Operating Instructions Manual

CD SYNCHRO RECORDING

• When the SYSTEM CONNECTOR jack of this unit is connected to that of Sherwood system CD player CD-801, the
CD synchro recording can be performed.
Do the steps 1~3 in "RECORDING"
procedure.
1
Select the CD as recording source.
2
SLEEP
1
4
7
FUNCTION
0
DOLBY
EDIT
AUTO/MONO
or
PROGRAM
MEMO
MUTE
Start CD synchro recording.
3
POWER
SLEEP
AUX
1 2 3
MD
4 5 6
TUNER
7 8 9
CD TAPE
0
DOLBY C.RESET CD SYNC. REV.MODE
EDIT TIME REPEAT RANDOM
EON RDS
AUTO/MONO TUNING TUNE MODE
PROGRAM
MEMO ENTER
VOL
VOL
MUTE TIMER
DISPLAY
REMOTE CONTROL UNIT
RM-404
• "CD SRS", " " indicators light up, this unit
rewinds the tape rapidly automatically, makes a 8
seconds blank space from the beginning of the front
side and then starts CD synchro recording.
• According to the selected reverse mode and the
erase-protection tabs, recording is made on the front
side or both sides.
• When selecting the recording of both sides as
reverse mode, if recording on the front side has been
finished, recording on the back side continues
automatically and in this case, the track being
recorded on the end of the front side will be
recorded again on the back side.
POWER CD
AUX
2 3
MD
5 6
TUNER
8 9
CD TAPE
C.RESET CD SYNC. REV.MODE
TIME REPEAT RANDOM
EON RDS
TUNING TUNE MODE
ENTER
VOL
VOL
TIMER DISPLAY
REMOTE CONTROL UNIT SYSTEM REMOTE
RM-404
CONTROL UNIT
(only for RX-801R)
CD SYNC.
SYSTEM REMOTE
CONTROL UNIT
(only for RX-801R)
1 3
• Because CD synchro recording will start from the
front side, be sure the erase-protection tab of the
front side.
• Only when the both of the erase-protection tabs on
the tape are in place, CD synchro recording can be
performed on both sides.
• When CD-801 is in the stop mode, the program
mode(meaning "PROGRAM" lights up in the stop
mode) and the edit mode, the CD synchro recording
will be performed.
• In the random and repeat mode, the CD synchro
recording cannot be performed.
To stop CD synchro recording.
4
SLEEP
1 2
4 5
7 8
0
DOLBY C.RESET
EDIT TIME
AUTO/MONO TUNING
PROGRAM
MEMO
VOL
VOL
or
MUTE
REMOTE CONTROL UNIT
RM-404
POWER
AUX
3
MD
6
TUNER
9
TAPE
CD
CD SYNC. REV.MODE
REPEAT RANDOM
EON RDS
TUNE MODE
ENTER
TIMER DISPLAY
SYSTEM REMOTE
CONTROL UNIT
(only for RX-801R)