Storage - CORONA SX-2E Owner's Manual

1) Remove clips from cross pins.
2) Pull cross pins off the burner base.
3) Install a new glass cylinder.
4) Assemble the burner chimney correctly as illustrated.
5) Fasten the burner chimney securely with two clips.
STORAGE
For the off-season or when it will be out of daily use for a long period of time, prepare the heater
according to the following procedure before storing it:
1) Wash the interior of the cartridge tank with clean fuel and let it drain completely.
2) Clean the wick as described in "How to clean the wick" (page 9).
3) Remove the front plate and the heater cabinet, and drain all the remaining fuel, water, or dust out
of the fixed fuel tank.
4) Wipe the fixed fuel tank, automatic shut-off system, wick guide, base plate, and burner chimney
clean with a soft cloth.
5) Reassemble the heater and make the cabinet and other components clean.
6) Remove batteries.
7) Press the shut-off button to make sure that the wick control lever is placed in the "OFF" position.
Cover the heater with the polyethylene bag and put it in the original carton and keep it in
its storage location.
8) Keep this Instruction Manual for future reference.
- 14 -