Connecting To A Dvd Player And Dtv Decoder - Sharp XV-Z9000U Operation Manual

Connecting to Video Equipment
Projector
1
1

Connecting to a DVD Player and DTV Decoder

Projector
1
S-video cable (commercially available)
2 To S-video output terminal
Video cable (commercially available)
2 To video output terminal
1 Connect each RCA connector of a component cable to the corresponding
RCA INPUT 1 or 2 terminals on the projector.
2 Connect the other end of the cable to the corresponding terminals on a DVD
player or DTV decoder.
When connecting this projector to a DVD player or DTV decoder, select
"Component" for "Signal Type" on the GUI menu. (See page 31.)
CAUTION
• Make sure to turn both the projector and the video equipment off, before
connecting.
Component cable
*
(commercially available)
2 To component output
terminals
*
* The (HD/C sync) and (VD)
terminals may be used depending
on the specifications of the DTV
decoder connected to this
projector. Please refer to the
operation manual of the DTV
decoder for details.
VCR,
Laser disc player,
DVD player or
DTV decoder
DVD player
or
DTV decoder
E-14