Special Mode Adjustment; Checking The Input Signal - Sharp XV-Z9000U Operation Manual

Adjusting the Computer Images (RGB menu only)
2,3,4
5
(GUI) On-screen Display
2,3
(GUI) On-screen Display

Special Mode Adjustment

Ordinarily, the type of input signal is detected and the
correct resolution mode is automatically selected.
However, for some signals, the optimal resolution mode
in "Special Modes" on the "Fine Sync" menu screen
1,6
may need to be selected to match the computer display
mode.
1 Press MENU.
2 Press
3 Press
4 Press
5 Press ENTER to save the setting.
6 To exit the GUI, press MENU.
• Avoid displaying computer patterns which repeat every other line
(horizontal stripes). (Flickering may occur, making the image hard
to see.)
• When inputting DTV 1080i signal, select the corresponding type of
signal in step 4 above.

Checking the Input Signal

This function allows you to check the current input signal
information.
1 Press MENU.
1,4
2 Press
3 Press
4 To exit the GUI, press MENU.
/ to select "Fine Sync".
to select "Special Modes", and then
/
press .
to select the optimal resolution.
/
/ to select "Fine Sync".
/ to select "Signal Info" to display the
current input signal.
E-34