Connecting To A Dvd Player And Dtv Decoder - Sharp XV-Z91E Operation Manual

Connecting to Video Equipment
Projector
1
1
S-video cable (commercially available)
Video cable

Connecting to a DVD Player and DTV Decoder

Connecting to a DVD player and DTV decoder with Component output (for INPUT 1)
Projector
1
Connecting to a DVD player and DTV decoder with component output (for INPUT 2)
1 Connect the 3 RCA to 15-pin D-Sub cable to INPUT 2 COMPONENT/RGB port on the projector.
2 Use the above cables to connect the DTV decoder or DVD player.
When connecting this projector to analog RGB output of the DTV decoder, select "Component" for "Signal Type" on the
OSD menu or press RGB/COMP. on the remote control. (See page 36.)
CAUTION
• Make sure to turn both the projector and the video equipment off, before connecting.
Projector
-13
2 To S-video output terminal
2 To video output terminal
1 Connect each RCA connector of a component cable to the corresponding
RCA INPUT 1 terminals on the projector.
2 Connect the other end of the cable to the corresponding terminals on a DVD
player or DTV decoder.
CAUTION
• Make sure to turn both the projector and the video equipment off, before
connecting.
2 To component output
terminals
Component cable
(commercially available)
1
3 RCA to 15-pin D-sub cable
(sold separately AN-C3CP)
2
VCR, Laser disc player,
DVD player or DTV decoder
DVD player
or
DTV decoder
DVD player
or
DTV decoder