When A Number Is Busy; Redial Previous Numbers - Siemens S46 User Manual

6.11.01 S46 US DRAFT

When a number is busy

If the called number is busy or can-
not be reached because of network
problems, the following options are
available (depending on the service
provider):
Press.
g&DOOEDFNg
Your phone rings when
the busy number is avail-
able. The number is di-
aled with the Call key.
Open menu.
g2SWLRQVg
Call back See above.
Prompt Reminder
A beep reminds you to redial
the phone number after
15 minutes
Auto dial Auto redial previous num-
bers
The number is automatically
dialed for up to 15 minutes at
increasing intervals. During
this period, no other number
can be dialed.
To end press End key or
press
An incoming call will end the function.
A31008-H5450-A5-*
Making a phone call
.
g2IIg

Redial previous numbers

To redial the phone number last
called:
Press the Call key
twice.
To display the list of other numbers
that were dialed previously:
Press the Call key
once.
Scroll to the required
phone number in the list.
Dial number.
Store number in the Address-
book (p. 26).
Records: The numbers of calls that have
been received, dialed or missed are stored
for call back purposes (p. 51).
An incoming call will interrupt any other use
of the phone.
Functions during the call (p. 22).
Switch off ringer for the current call (but not,
if "Any key answer", page 77 is active):
Hold down.
The call is displayed. The caller hears the
dialing tone.
21