At The D Of This Making A Phone Call; Er Guide Dialling With Number Keys; End Call; Set Volume - Siemens C55 User Manual

14
Dialling with number
keys
The phone must be switched on
(standby mode).
Enter the number (always
J
with prefix, if necessary
with the international di-
alling code).
§Clear§
the last digit, a long press
clears the entire number.
A
Press the Call key. The
phone number displayed
is dialled.

End call

B
Press the End key briefly.
The call is ended. Press
this key even if the person
on the other end of the
line has hung up first.

Set volume

E
You can activate adjust-
ment of the handset vol-
ume with the control key
(at the top), but only dur-
ing a call.
G
Set volume.
If a Car kit is used, its volume setting
does not affect the usual setting on
the phone.
Making a phone call
A short press clears

Redial previous numbers

To redial the phone number last
called:
A
Press the Call key twice.
To redial other numbers that were
dialled previously:
A
Press the Call key once.
Pick out the required
G
phone number from the
list, then press...
A
... to dial.
Note
Store number .........................p. 19
§Options§ Call lists.............................p. 27
Swap/conference....................p. 16
§Hold§
y menu§
Call menu ..........................p. 18
§Divert§ Divert set ..............................p. 60
§Handsfr.§ Handsfree.........................p. 16
Voice dialling .....................................p. 23
International dialling codes............... p. 78
Auto key lock .....................................p. 60
Phone number memo........................p. 80
Microphone off ..................................p. 18
Phone number transmission off/on
(Hide ID)............................................p. 60
Control codes (DTMF).......................p. 76